![Netgear Router Lights](https://192-168-0-admin.com/wp-content/uploads/2024/06/Netgear-Router-Lights.jpg)
June 25, 2024 / temp
Netgear Router Lights: Meaning and Troubleshooting Explained
Netgear routers are engineered with so much perfection that they have separate LED lights on them to reveal about a particular working state. These LED lights sometimes fascinate the user whereas it can put a person in worries on some occasions. After all, no one wants to see the red light of danger on their routers. This blog will discuss everything related to Netgear router lights and tell you what to do in case you notice them flashing an unfavorable color.
What are the Different Netgear Router Lights?
As told earlier that Netgear routers have different lights that correspond to various functions. Given below is a little description of these lights along with their symbol.
LED Light |
Description |
Power |
It reveals whether the power supply to the router is enough or not. |
Internet |
Various colors shown by the Internet light tells if the router is connected to the modem by an Ethernet cable properly. |
WiFi |
It tells the user about the functionality of router’s WiFi radios. |
WiFi Band |
3 different band lights 2.4GHz, 5GHz, and 6GHz tells if the corresponding WiFi radio is On or Off. |
USB |
The purpose of the USB light is to reveal whether you have connected a USB drive to the respective port. |
Ethernet |
Performs the same task as the USB LED. However, here you can connect Ethernet devices only. |
WPS |
It reveals the success or failure of a WPS connection. |
Moving on, let’s discuss various colors that appear on these lights and what do they mean so that you can take an appropriate action to troubleshoot any related issue.
Netgear Router Lights: Meaning and Troubleshooting
1. Power LED
Status |
Meaning |
Troubleshooting (If Needed) |
Off |
The router is switched off. |
Turn on the router if you want. |
Solid white/green |
Your Netgear router is ready for use. |
|
Solid amber |
The router is being powered up. |
|
Blinking amber |
Firmware update or reset is in progress. |
Wait for the process to complete. |
Blinking white |
The firmware of the router is corrupted. |
Update the router’s firmware again using the correct steps. |
Just in case you own a Netgear R8000 WiFi router and you notice its Power light blinking white and amber alternatively, it means the router is working in AP mode. You can switch to the router mode by accessing the Netgear router login address.
2. Internet LED
Status |
Meaning |
Troubleshooting (If Needed) |
Off |
No cable connected to router and modem. |
Join the router’s WAN and the modem’s LAN port using Ethernet. |
Solid white/green |
Your internet connection is ready. |
|
Solid amber |
There’s an Ethernet link between router and modem. |
|
Blinking white |
The Internet port of the router is sending or receiving traffic. |
|
3. WiFi LED
Status |
Status |
Troubleshooting (If Needed) |
Off |
All WiFi radios are off. |
Enable router’s SSID broadcast. |
Solid white |
WiFi radios of the router are working. |
|
Blinking |
Data is being transferred via WiFi. |
|
4. WiFi Band LEDs (2.4GHz, 5GHz, and 6GHz)
Status |
Meaning |
Troubleshooting (If Needed) |
Off |
The respective WiFi radio is not working. |
Enable SSID broadcast for the respective WiFi radio. |
Solid white |
The respective WiFi radio is working |
|
Blinking |
Data is being transferred via specific WiFi band. |
|
5. USB LEDs
Status |
Meaning |
Troubleshooting (If Needed) |
Off |
No USB connected. If it was there, you have selected the Safely Remove Hardware option. |
Connect USB if you want to use it or remove it in case you chose Safely Remove Hardware. |
Blinking |
You have plugged in a USB device to the router and it is attempting a connection. |
Wait |
Solid green/white |
Your USB device is ready for use. |
|
6. Ethernet LEDs
Status |
Meaning |
Troubleshooting (If Needed) |
Off |
No device is connected to the corresponding port. |
Connect your Ethernet-enabled device to the port. |
Solid |
You have connected a powered-on device to the Ethernet port. |
|
Blinking |
The Ethernet port is sending or receiving traffic. |
|
7. WPS LED
Status |
Meaning |
Troubleshooting (If Needed) |
Off |
There’s no WPS connection. |
Press the WPS button on your router and WPS-enabled device to start the connection. |
Solid |
The WPS connection is successful. |
|
Blinking |
The WPS connection is being made. |
Not required. Wait for the light to stabilize. |
In case you notice the LED lights on your router flashing some other color, you are suggested to reset Netgear router and set it up once again.
The Conclusion
It can be difficult to understand the hidden messages conveyed by the Netgear router lights. But, with the correct knowledge you can easily observe the situation and fix related issues.