![How to Reset Netgear Router](https://192-168-0-admin.com/wp-content/uploads/2024/05/How-to-Reset-Netgear-Router.jpg)
How to Reset Netgear Router – 2 Methods Explained
You might need to reset Netgear router if you are facing connectivity issues or your router is not allowing you to log in. There are two methods to reset a Netgear wireless router – Hard Reset and Soft Reset. This blog will tell you how to reset Netgear router using these methods.
- Hard Reset: In this method, you have to press the router’s Reset button for a few seconds.
- Soft Reset: This method needs you to access the web interface of the router.
Note: Performing a reset on Netgear router will make it work on the default factory settings. The default settings are those settings that the router’s manufacturer set during its manufacturing.
How to Reset Netgear Router [Steps]
1. Hard Reset Method
You can use this method if your Netgear router does not connect to internet at all and you can’t log in to it. The steps to perform a Hard Reset on Netgear routers are mentioned below:
- Disconnect all devices connected to your Netgear router.
- Check that your router is connected to a working socket.
- Thereafter, get hold of a pointed object (a paper clip or a pin).
- Find the Reset button on your Netgear Router.
- Using the pointed object, press the button.
- Release the button after 7 seconds.
- Your Netgear router will reset.
2. Soft Reset Method
As told earlier, this method requires you to access the web user interface of the router. Thus, you can’t opt for this method if you are unable to log in to your Netgear router. The instructions given below will let you know how to reset Netgear router via the Soft Reset method.
- Verify the connection between your Netgear router and the modem. It should be stable.
- After that, connect your PC to the router’s WiFi network.
- You can also use an Ethernet cable for easy access to the router’s web GUI.
- Once done, you should open an internet browser and go to routerlogin.net.
- If routerlogin.net refuses to connect, try using 192.168.1.1.
- This will open the Netgear router login page for you.
- Into the Password field, type the current admin password of your Netgear wireless router. However, the Username will be admin.
- The login username and password of the router are case-sensitive.
- Click Log In.
- You will see the Netgear router STATUS page.
- Select ADVANCED > ADMINISTRATION > BACKUP SETTINGS.
- Click the ERASE option.
- This will begin the reset process and your router will soon reset to its default settings.
In this manner, you can reset your Netgear router. Remember that, no matter if you are resetting the router via the Hard Reset method or using the web user interface, you will have to set up the router once again.
After a factory reset, the router will have the following default values:
- Username: admin (in lowercase)
- Password: password (in lowercase)
- SSID and WiFi Password: Given on the router’s label and the user manual
- Default IP: 192.168.1.1
Quick Tip: You should know that there is a big difference between the Reset and Reboot process. Rebooting the router will only restart it. It is more similar to power cycling that involves unplugging the router from the power outlet and plug it back after a few minutes. On the other hand, resetting is all about taking the router back to its original state.
The Final Words
It is now time to wrap up the post that explained how to reset Netgear router. We are hopeful that with the help of the information provided above, you will be able to restore your WiFi router back to its original state.